Camera Status; Camera Toolbar - Honeywell Performance Series User Manual

Camera Status

Camera status icons appear at the bottom of the channel window.
Video is being recorded
Motion detected in scene

Camera Toolbar

A camera toolbar is located at the top of each channel window. To display the toolbar, move
the mouse pointer to the top of the channel window.
Figure 3-2 Live View - Camera Toolbar
Table 3-1 Live View - Camera Toolbar
Icon Name Function
Playback the previous 5-60 minutes record of
Instant Replay
current channel.
Go to the Main
menuSettingSystemGeneral to set
instant replay time.
System may pop up a dialogue box if there is
no such record in current channel.
Digital Enlarge a specific area of the image. Click the
Zoom/Enlarge button to enable digital zoom and then drag
the mouse in the channel window to select the
area that you want to enlarge.
Right-click to undo digital zoom.
Realtime Backup Save a clip to a USB storage device. Click the
button to start recording. Click again to stop
recording. The clip is automatically saved to
the connected USB storage device.
Snapshot
Save a screen capture to the hard drive or to a
connected USB storage device. To view the
captured image, go to Main Menu 
Operation  Search and click the File List
button.
Click to enable or disable bi-directional
Audio Talk
communication with an IP camera that is
equipped with both a microphone and
speaker.
Note:
button only works in single-channel view.
Switch Stream Switch the camera stream between the main
and sub streams.
No video signal
Camera locked
The bi-directional communication
Viewing Live Video
27