Replace Igniter Batteries; Crossover Ignition System Operations - Weber 42371 Owner's Manual

®
Crossover Ignition System Operations
If the Crossover ® ignition system fails to ignite the LEFT
burner in a burner set, light the LEFT burner with a match.
If the LEFT burner lights with a match, then check the
®
Crossover ignition system.
• Check that both ignition wires(1,2) are attached prop-
erly.
• Check that the Crossover
• Replace battery with a like brand battery.
• You should hear the igniter sparking.
®
If the Crossover ignition system still fails to light, contact
the Customer Service Representative in your region using
the contact information sheet provided with your manual.
MAINTENANCE
® ignition button is activating.
(1)
(2)

Replace Igniter Batteries

Parts required: 1 AA alkaline battery per igniter.
Unscrew igniter button from top of control panel. Remove
igniter button and contact spring. Remove old battery and
replace with a new AA alkaline battery. Positive end(1) of
battery faces up as shown in illustration. Replace spring
contact(2) and screw igniter button(3) back down.
19 19