Logical Formatting Upon Completion Of Installing The Hdd - Sony BKMA-U70 Installation Manual

Hard disc drive upgrade kit for mav-70
Table of Contents

Advertisement

3-1. Replacement and Removal Procedures of the HDD

3-2. Logical Formatting upon Completion of Installing the HDD

Installation Procedure
1. Insert a new HDD unit into the slot gently, and press
the levers in the direction of the arrows to lock the
HDD unit.
2. Attach the HDD No. label which has same number as
removed HDD to the front of the new HDD unit.
. HDD No. label : 3-605-401-01
3. Attach the HDD identification label.
HDD No. label
4. Install the front panel (lower). (Refer to Section 2-2-1
of the MAV-70 Maintenance Manual Volume1.)
5. Turn on the power switch.
3-2 (E)
HDD
identification
label
3 6
K
1 0
HDD unit
Levers
3-2. Logical Formatting upon
Completion of Installing the HDD
How to Execute Logical Formatting of HDD by the
MAV-70 itself
Keys to be used for menu operations
Use the following five keys located to the LCD display.
The key(s) for use in the next operation will light.
Moves the cursor upward.
Moves the cursor
to the left.
Moves the cursor downward.
Basic layout of the displays
Examples: Board menu display
Slot ID number
1
2
Exit
Boards
Slot
Param
Config
-1-
-2-
-4-
>Default
ENC
ENC
DEC
Function cursor
1 Function menu block
Lists displays and functions that can be selected in a menu
format.
Up to 4 items can be displayed at a time. If the menu
contains more than 5 items, you can scroll the display with
the 0 key.
<Operation>
1. Place the function cursor (>) at the desired item by
moving it up or down with the 9 or 0 key.
2. Press the [ENTER] key for an item to select a
display. The corresponding display appears.
For an item for mode/parameter setting, select the
desired mode or value with the 7 or 8 key.
n
When you press the [ENTER] key for some items, a
"Caution" display may appear, showing a message to
confirm your selection and "Cancel" and "Execute" in the
function menu.
To continue, place the function cursor (>) at "Execute" and
press the [ENTER] key again.
For the confirmation messages, see "Messages" on page
17(E) of the MAV-70 Operation Manual.
Registers the selection
with the cursors.
ENTER
Moves the cursor
to the right.
Object cursor
n
***
3
-5-
-6-
-7-
-8-
DEC DEC
FC
SY
PU
4
BKMA-U70

Advertisement

Table of Contents
loading

Table of Contents