Sony BKMA-U70 Installation Manual page 18

3-4. Confirming HDD Capacity
4. Start up TeraTerm and select "serial".
Setup/Serial port:
Port (COM1*)
Baud: 38400, Data: 8, Parity: none, Stop: 1, Flow Control: none
* : Needs to be changed depending on Personal Computer.
5. Select "Service/Execute/Boards/EXT232C Select Slot8 PU" from the menu display.
6. Check to see that "HDD CAPACITY: 0036.4 GB (36 GB HDD), 0072.8 GB (73 GB HDD)" appears
on the display.
n
For the HDD CAPACITY indication for 146 GB or larger, refer to the CD-ROM supplied with this
kit.
n
The HDD capacity can be checked by the following procedure.
For the HDD having capacity of 146 GB or larger, refer to the CD-ROM supplied with the HDD.
. Select "Service/Execute/Boards/EXT232C Select Slot7 SY FSE" from the menu display.
. Input "el" and press the [Enter] key.
. Confirm that the Encl Size appears on the display is 00FFh for 36 GB, 01FEh for 73 GB, and 03F7h or
a value close to it for 146 GB.
. The following examples show display (36 GB and 73 GB) for MAV-70XGI.
<Example of display (Immediately after the logical formatting) : 36 GB>
FSE>el
[FSE] Version: 2.50, Dec 14 2000
Copyright (C) 1997-2000 Sony Corporation
Compiled at Dec 14 2000, 20:39:02
For MAV-70, NTSC, 4800ALBA, NEW:Official Release
Number of Enclosure = 01
Encl Serial In Start
ID Number Use AVClst
01 xxxxx Use 0020h
ALL xxxxx 01h ------
<Example of display (Immediately after the logical formatting) : 73 GB>
FSE>el
[FSE] Version: 2.6, Dec 14 2000
Copyright (C) 1997-2000 Sony Corporation
Compiled at Dec 14 2000, 20:39:02
For MAV-70, NTSC, 4800ALBA, NEW:Official Release
Number of Enclosure = 01
Encl Serial In Start
ID Number Use AVClst
01 xxxxx Use 0020h
ALL xxxxx 01h ------
3-6 (E)
End Avail NumOf Encl
AVClst AVClst AVClst Size[GB]
38BFh 38A0h 38A0h 00FFh
------ 38A0h 38A0h 00FFh
00FFh or a value close to it
End Avail NumOf Encl
AVClst AVClst AVClst Size[GB]
7180h 7160h 7160h 01FEh
------ 7160h 7160h 01FEh
01FEh or a value close to it
Encl
Using[%]
00
000
Encl
Using[%]
00
000
BKMA-U70