Step 2-7 Taping The Pipes, Cables, And Drain Hose - Samsung AC TNXDKG Series Installation Manual

Indoor Unit Installation
CAUTION
• If the diameter of the connection hose is smaller than
the product's drain hose, leakage may occur.
Drain hose (A)
Drain hose
Vinyl tape
4 Do not box in or cover the drain hose connection. It must
be accessible for testing later in the installation process
and for future servicing.
5 If the drain hose is routed inside the room, insulate the
hose so that dripping condensation does not damage the
furniture or floors.
14 English
DB68-08947A-00_IM_CAC QMD_EU_EN_.indd 14
Extension drain hose (B)
40~45mm
40~45 mm
(A) (B)
Extension drain hose
20 mm or more
Foam insulation
Step 2-7 Taping the pipes, cables, and
drain hose
1 Wrap foam insulation around the refrigerant pipes, up
to the connection points. The connections must remain
accessible for testing later in the installation process.
Either leave slits in the insulation or do not cover the
connections.
Insulation
Refrigerant pipes
2 Make a piping bundle by using vinyl tape to wrap together
the refrigerant pipes, power cable, communication cable,
and drain hose, up to the connection points. Connection
points must remain accessible for testing later in the
installation process.
Mounting bracket
Vinyl tape
Power and communication
cables (assembly cable)
Drain hose
Test parts for the
indoor unit
Refrigerant pipes
(assembly pipe)
2020-02-10 오전 11:14:29