Step 2 Unpacking; Step 3 Checking And Preparing Accessories; Step 4 Drilling A Hole Through A Wall; Step 5 Taping The Pipes, Cables, And Drain Hose - Samsung AC BNPDKH Series Installation Manual

Step 2 Unpacking

Unpacking the indoor unit
1 Open the indoor unit package.
2 Remove the top and middle cushions.
3 Remove the bottom cushion.
Unpacking the outdoor unit
1 Pull out the outdoor unit from the package.
2 Remove the top cushion.
3 Remove the 4 screws from the wooden pallet.
4 Remove the wooden pallet.
Step 3 Checking and preparing
accessories
The following accessories are supplied with the air
conditioner. Their type and quantity may differ depending on
the specifications.
Accessories in the indoor unit package
Fixing bracket for indoor unit (1)
MANUAL (2)
Batteries for remote control (2)
M4 X L12 screws (4)
Pipe outlet protection rubber (1)
Remote control (1)
Remote control holder (1)
Insulation for piping(1)
M4 X L14 screws (4)
Insulation for drain hose (1)
Accessories in the outdoor unit package
Drain cap (3)
Rubber leg (4)

Step 4 Drilling a hole through a wall

1 Determine the position of a 60 to 65 mm hole considering
possible directions of the pipe bundle and minimum
distances between the hole and installation plate.
2 Drill the hole that slopes slightly downward (15°).
Indoor unit
Ø 60~65 mm
Step 5 Taping the pipes, cables, and
drain hose
1 Wrap the refrigerant pipes with the provided insulation.
This wrapping minimises condensation.
Insulation
Refrigerant pipes
Drain plug out (1)
Outdoor
English 9