Suzuki Baleno Manual page 98

BEFORE DRIVING
Clock
When the ignition switch is in "ON" posi-
tion, the display (D) shows the time.
To change the time indication:
1) Push the trip meter selector knob (2)
and the indicator selector knob (3)
together.
2) To change the hour indication, turn the
indicator selector knob (3) left or right
repeatedly when the hour indication
blinks. To change the hour indication
quickly, turn and hold the indicator
selector knob (3). To set the hour indi-
cation, push the indicator selector knob
(3) and the minute indication will flash.
3) To change the minute indication, turn
the indicator selector knob (3) left or
right repeatedly when the minute indi-
cation blinks. To change the minute
indication quickly, turn and hold the
indicator selector knob (3). To set the
minute indication, push the indicator
selector knob (3).
2-79
WARNING
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
Do not attempt to adjust the display
while driving.
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the clock indication will
be reinitialized. Change the indication
again to your preference.
68PM2-01E