Gearshift Indicator - Suzuki Baleno Manual

OPERATING YOUR VEHICLE
Right hand drive vehicle
(1)
EXAMPLE
68PM00311
Vehicles with a CVT have an electrically
operated park-lock feature. If the vehicle's
battery is discharged, or there is some
other electrical failure, the CVT cannot be
shifted out of Park in the normal way. Jump
starting may correct the condition. If not,
follow the procedure described below. This
procedure will permit shifting the transaxle
out of Park.
3-27
1) Be sure the parking brake is firmly
applied.
2) If the engine is running, stop the
engine.
3) Make sure the key is in "ON" or "ACC"
position, or the ignition mode is "ON" or
(2)
"ACC".
4) With the release button (1) pushed,
push the knob button (2) and shift the
gearshift lever to the desired position.
This procedure is for emergency use only.
If repeated use of this procedure is neces-
sary, or the procedure does not work as
described, take the vehicle to your dealer
for repair.

Gearshift indicator

EXAMPLE
68PH02218
(1) Gearshift indicator
In the following cases, the gearshift indica-
tor is indicated on the information display
when the ignition switch is in "ON" position
or the ignition mode is "ON".
• For manual transaxle vehicle, when the
gearshift lever is in a position other than
"N" (Neutral).
• For automatic transaxle vehicle, when
using the manual mode.
• For vehicles equipped with the cruise
control, when the system is not in use.
68PM2-01E