Parking Brake Lever - Suzuki Baleno Manual

Hide thumbs Also See for Baleno:
Table of Contents

Advertisement

by pressing the engine switch and then
perform the engine starting operation.
Refer to "Starting engine (vehicle with key-
less push start system)" in this section.
• Always keep the remote controller with
you as the driver.
Interior workable area for engine
starting
(1)
68PH00306
(1) Interior workable area
The interior workable area is defined as all
the interior spaces except for the space
above the instrument panel.
NOTE:
• Even when the remote controller is in the
interior workable area, if it is in any of the
following conditions, you may not be
able to start the engine or select the igni-
tion modes, and the REMOTE CON-
TROLLER OUTSIDE warning may be
given.
–The remote controller's battery is low.
–The remote controller is affected by
strong radio signals or noise.
–The remote controller is in contact with
or covered by a metallic object.
–The remote controller is in stowage
such as the glove box or a door
pocket.
–The remote controller is in the sun visor
pocket or on the floor.
• Even when the remote controller is out-
side the interior workable area, if it is in
any of the following conditions, you may
be able to start the engine or select the
ignition mode. The REMOTE CON-
TROLLER OUTSIDE warning may not
be given at that time.
–The remote controller is outside the
vehicle but very close to a door.
–The remote controller is on the instru-
ment panel.
OPERATING YOUR VEHICLE

Parking brake lever

EXAMPLE
(1)
(2)
(3)
(1) To set
(2) To release
(3) To release
The parking brake lever is located between
the seats. To set the parking brake, hold
the brake pedal down and pull the parking
brake lever all the way up. To release the
parking brake, hold the brake pedal down,
pull up slightly on the parking brake lever,
push the button on the end of the lever
with your thumb, and lower the lever to its
original position.
68PM2-01E
54G039
3-10

Advertisement

Table of Contents
loading

Table of Contents