Suzuki Baleno Manual page 410

INSPECTION AND MAINTENANCE
EXAMPLE
68PH00732
1) Open the engine hood. To remove the
bulb holder of the front turn signal light
or the front position light from the light
housing, turn the holder counterclock-
wise and pull it out.
7-53
EXAMPLE
(2)
(3)
(4)
(1)
68PM00721
(3) Removal
(4) Installation
2) To remove the bulb of the front turn sig-
nal light (1) from the bulb holder, push
in the bulb and turn it counterclockwise.
To install a new bulb, push it in and turn
it clockwise.
To remove and install the bulb of the
front position light (2), simply pull out or
push in the bulb.
Front fog light (if equipped)
1) Start the engine. Turn the steering
wheel to the opposite side of the fog
light to be replaced to replace the bulb
easily. Then turn off the engine.
EXAMPLE
(1)
68PM00722
2) Remove the clips (1).
68PM2-01E