Suzuki Baleno Manual page 330

OTHER CONTROLS AND EQUIPMENT
Phone registration
To use the hands-free function with this
unit, it is required to register the phone
in advance.
NOTE:
• Up to 5 phones can be registered.
• To set up a new phone, disconnect the
audio player from the unit. Connect the
audio player again after phone setup is
completed if necessary.
• When attempts to establish the pairing
fail within 60 seconds, the connecting
operation will be canceled. Try to estab-
lish the pairing again or refer to the man-
ual of the phone in use for how to
establish the pairing with the phone.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Pairing", and press the
knob (1) to determine the selection.
4) Select "My Car" from the Bluetooth
menu of the phone and establish the
pairing.
Refer to the manual of the phone in use
for further information.
5) Enter the passkey displayed on the unit
to the phone.
5-65
6) When the pairing with the phone is
established, automatic transfer of the
phonebook and the call
becomes selectable. The automatic
transfer starts with "Yes" and it does not
with "No".
7) Press ON HOOK button (8).
NOTE:
• When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
• When registering an additional phone,
repeat Step from 1).
Receiving a call
Press OFF HOOK button (7) to receive a
call.
Ending a call
Press ON HOOK button (8) to end a call.
Rejecting a call (only for supported
models)
Press ON HOOK button (8) to reject a
incoming call.
Mute of hands-free microphone
Press MUTE switch (9) to mute the micro-
phone. To cancel the mute, press MUTE
®
switch (9) again.
Adjusting the listening volume
• Turn "VOL PUSH PWR" knob (2) during
history a call.
Turning it clockwise increases the vol-
ume; turning it counterclockwise
decreases the volume.
• Press "VOL" switch (10) during a call.
Pressing "+" of the switch increases the
volume; pressing "-" of the switch
decreases the volume.
Adjusting the ring volume
• Turn "VOL PUSH PWR" knob (2) while a
call is coming in.
Turning it clockwise increases the vol-
ume; turning it counterclockwise
decreases the volume.
• Press "VOL" switch (10) during a call.
Pressing "+" of the switch increases the
volume; pressing "-" of the switch
decreases the volume.
Adjusting the call or ringtone volume
Follow the instructions below to adjust the
call or ringtone volume.
®
1) Press the Bluetooth
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Telephone", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Sound Setting", and press
the knob (1) to determine the selection.
setup button (5)
68PM2-01E