Refrigerating circuit safety valves
Each system comes with safety valves that are installed on each circuit, both on the evaporator and on the condenser.
The purpose of the valves is to release the refrigerant inside the refrigerating circuit in the event of certain malfunctions.
This unit is designed for installation outdoors. However, check that there is sufficient air circulation through the machine.
If the machine is installed in closed or partly covered areas, possible damage from inhalation of refrigerant gases must
be avoided. Avoid releasing the refrigerant into the atmosphere.
The safety valves must be so connected to discharge outdoors. The installer is responsible for connecting the safety
valves to the discharge piping and for establishing their size.
Figure 12 - Evaporator pressure drop
EWYD~
Label
BZSS
250
A
270
290
320
B
340
D-EIMHP00508-16EN - 26/64
EWYD~
EWYD~
Label
BZSL
BZSS
250
370
C
270
380
290
410
D
320
440
E
330
460
WARNING
EWYD~
Label
BZSL
360
F
370
400
G
430
450
EWYD~
EWYD~
BZSS
BZSL
510
490
520
510
580
570