•
Chain dialing
can be useful
if you wish to
access numbers
other than phone
numbers (such
as bank account
information or
access codes)
from the directory,
call log or redial
list.
14
Telephone operation
Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in the
directory, call log or redial list while you are on a call.
To access a number in the directory:
Press MENU/SELECT twice to enter the directory menu.
1.
2.
Scroll by pressing
Press MENU/SELECT to dial the desired number when it is displayed.
3.
To access a number in the call log:
Press MENU/SELECT and then press
1.
Press MENU/SELECT to confirm.
2.
3.
Scroll by pressing
4.
Press MENU/SELECT to dial the desired number when it is displayed.
To access the last number in the redial list:
Press REDIAL/PAUSE to dial.
•
•
Press REDIAL/PAUSE again within two seconds to cancel the chain dialing.
Find handset
This feature allows the telephone base to page the handset.
1.
Press FIND HANDSET on the telephone base. The handset
will ring and its screen displays ** PAGING ** .
/FLASH,
2.
Press
on the handset; or press FIND HANDSET on the telephone
base to end paging.
www.vtechphones.com
or
to find the desired entry.
or
to find the desired entry.
/SPEAKER or any dialing key (0-9, #, * )
to select > CALL LOG.
** PAGING **