Table of Contents
Advertisement
Telephone Operation
Intercom and call transfers
VTECH
INTERCM
MENU
Some features described on this page are available
only if you have purchased and registered optional
expansion handsets (see page 25).
Paging and intercom calls
The intercom allows you to communicate with
2 > LIVING ROOM
expansion handsets without using an outside line.
3 BEDROOM
Select
INTERCM
OK
V^
the
choose
CALL ALL
page the highlighted handset(s).
To answer a page, select
the call. If you receive an outside call while using the
Shortcut:
intercom, press the flashing
Press Intercom, enter number
the outside call (this will end your intercom call).
of handset (or * to select all),
then press OK to page.
Call forward and call transfer
During a conversation you can select
places your call on hold) to page another handset
Note:
and send the call to it.
Intercom and call transfer
features cannot be used when
Call Forward (stardard calls only): Press
both Internet and standard
your intercom page is answered. If the paged handset
telephone lines are in use .
is not answered in about 30 seconds, the external call
will be returned to your handset. If you do not press
to answer within 30 seconds, the external call
CALL
will be terminated.
Call Transfer (standard or Internet calls): After your
page is answered you can speak to the person at the
remote handset. Either person can press
release the external call to the other person. If no one
answers the paged handset, press the flashing
button to retrieve the call.
Handset locator
If you misplace a handset, press
the base. All registered handsets will ring for 60 sec-
onds to help you locate them. To stop the ringing,
press
OFF
the base.
to see a list of active handsets. Press
buttons to highlight the set you want (or
to page all handsets). Select
OK
. Press
to end
INTERCM
OFF
button to answer
CALL
INTERCM
before
OFF
to
OFF
CALL
LOCATE HANDSET
at the handset, or press
LOCATE HANDSET
14
Press
to begin
MENU
VTECH
INTERCM
MENU
Highlighted menu item
1> TONES
2 HANDSET NAME
to
OK
RINGER LEVEL
* * * _ _ _
OK
1 >
2
(this
OK
3 > KEY BEEP
4 CONTACT ALRT
OK
4 > CONTACT ALRT
1 RING LEVEL
OK
HANDSET NAME
PAT _
OK
at
at
Telephone Operation
Handset settings
At the feature menu you can change settings to
customize how your handset works.
V^
Select
then use the
buttons to scroll to
MENU,
the feature you want to change. As you scroll, the
top menu item is always highlighted with a > charac-
ter. Select
to choose the highlighted item, then
OK
V^
use the
buttons to scroll to the next feature
you want to change.
Press
at any time to cancel an operation, go back
OFF
to the previous menu, or exit the menu display. (The
menu will time out after 30 seconds of inactivity.)
1 Tones
V^
1 Ring level: Press
repeatedly to hear sample
volume levels, then select
to save the current
OK
level. If you turn the ringer off, the warning message
"Ringer Off" will be displayed when the phone is idle.
2 Ring pattern: Select type of call (1-Internet or 2-
V^
Standard), select
, then press
OK
hear sample ring patterns. You can choose a differ-
ent ring pattern for each type of call. Select
save the current ring pattern.
3 Key beep: The handset is factory programmed to
beep at each keypress. Select
to toggle key beeps
OK
on or off (a checkmark appears when on). Press
to save & exit.
4 Contact alert: This tone alerts you when someone
on your Internet contact list is online. Select
toggle this alert on or off (a checkmark appears
when on). Press
to save & exit.
OFF
2 Handset name
At this menu you can customize the name that
appears on the handset screen when the phone is
idle. If you have multiple handsets, the name will
also appear in their intercom call lists.
See page 19 to learn how to enter letters. If you
make a mistake, press
to erase letters. Select
CLEAR
to save the name and exit.
OK
15
repeatedly to
, to
OK
OFF
to
OK
Advertisement
Table of Contents
