CHAPTER 4 INSTALLATION & MAINTENANCE
3. Removing
Material
Remove all of the tape and protective
material that is attached to the main body.
Figure 4-101
Figure 4-102
4-2
the
Packing
COPYRIGHT © CANON ELECTRONICS INC. 2011
4. Installing the Software
Install the following software from the
included setup disk that is required in
order to use the scanner.
• CaptureOnTouch
• Scanner driver
Note: The software should be installed
before connecting the machine to a
computer.
The following shows an outline of the
installation on Windows.
1) Login
using
Administrator privileges.
2) Before installing the software, exit all
other applications.
3) Load the setup disk into the DVD
drive of the computer.
4) The setup menu starts automatically.
5) Click [Typical Installation].
Figure 4-103
Finish the installation by following the
on-screen messages.
an
account
with
CANON DR-C125 FIRST EDITION