Canon imageFORMULA DR-C125 Service Manual page 48

CHAPTER 3 DISASSEMBLY & REASSEMBLY
5. Front Unit
1) Remove the right and left covers.
Note: Remove the cable cover also.
2) Remove the rear cover.
3) Remove the screw
2 connectors
2
cables (each internal wire is copper
3
foil) from the cable guide of the main
body.
Figure 3-110
4) Open the front unit
from the left side, then unhook the
2
fitting part to pull the shaft out from the
opposite side and remove the front unit.
Figure 3-111
3-4
(BH, M3) and the
1
, and remove the 3 flat
, remove the shaft
1
COPYRIGHT © CANON ELECTRONICS INC. 2011 CANON DR-C125 FIRST EDITION