Speed Volume Function; External Audio Vol Function; Radio Off Function; Restore Default Function - Fiat 500 Manual

SPEED VOLUME function

(volume change based on speed)
This function automatically adapts the vol-
ume level to the speed of the car, turn-
ing up the volume when the speed in-
creases to maintain the ratio with the
noise level inside the passenger compart-
ment.
To turn the function on/off, use the but-
tons ¯ or ˙. The current status of the
function will appear:
❒ OFF: function off
❒ LOW: function on
(low sensitivity)
❒ HIGH: function on
(high sensitivity)
18

EXTERNAL AUDIO VOL function

This function is used to adjust (settings
from 0 to 40) or exclude (OFF setting) the
external audio sources.
To turn the function on/off, use the but-
tons ¯ or ˙.
The current status of the function will ap-
pear:
❒ "EXTERN FUNCTION OFF": function
off.
❒ "EXTERN VOLUME: 23": function on
with volume set to 23.

RADIO OFF function

(on and off mode)
This function is used to select the mode
of turning off the radio between two dif-
ferent procedures. To turn the function
on, use the buttons ¯ or ˙.
The selected mode will appear on the dis-
play:
❒ "00 MIN ": the radio turns off in con-
nection with the ignition key; the ra-
dio turns off automatically as soon as
the key is turned to the STOP position;
❒ "20 MIN": the radio turns off indepen-
dently from the ignition key; the radio
remains on for a maximum period of 20
minutes after the key has been turned
to the STOP position;
WARNING If the radio is turned off au-
tomatically after the key is turned to the
STOP position (turning off immediately or
delayed after 20 minutes), it will turn on
automatically when the key is turned to
the MAR position. On the contrary, if the
radio is turned off by pushing the ON/OFF
button, when the key is turned to the
MAR position, it will remain off.

RESTORE DEFAULT function

This function is used to restore all settings
to their preset factory values. The options
are:
❒ NO: do not restore;
❒ YES: the default parameters will be re-
stored. During this
"RESTORING" will appear on the dis-
play. At the end of the operation, the
source does not change and the previ-
ous situation will be displayed.
operation,