Fader Adjustment; Loudness Function; Antitheft Protection - Fiat 500 Manual

FADER ADJUSTMENT

Proceed as follows:
❒ Use the button
"FADER" in the AUDIO menu;
❒ press the button ¯ to increase the
sound from the rear speakers or the
button ˙ to increase the sound from
the front speakers.
By pressing the buttons briefly, the levels
will change progressively. By pressing them
down longer, the levels will change quick-
ly.
Select "¯ 0 ˙" to set the same level for
the front and rear audio outputs.

LOUDNESS FUNCTION

The Loudness function improves the
sound volume when listening at a low vol-
ume by increasing the bass and treble
tones.
To turn this function on/off, use the but-
ton or to select the "LOUDNESS"
setting in the AUDIO menu. The condi-
tion of the function (on or off) is shown
on the display for a few seconds with
"LOUDNESS ON" or "LOUDNESS
OFF".
12
PRESET/USER*/CLASSIC/
ROCK/JAZZ functions
(equaliser on/off)
or to set the
The built-in equaliser can be turned on/off.
When the equaliser function is off, the au-
dio settings can only be changed by ad-
justing the "BASS" and "TREBLE" settings,
whereas when the function is on, the
acoustic curves can be adjusted.
To turn off the equaliser, select the "PRE-
SET" function using the buttons ¯ or ˙.
To turn on the equaliser, use the buttons
¯ or ˙ to select one of the adjustments:
❒ "USER" (adjustment of the 7 equaliser
bands the user can change);
❒ "CLASSIC" (equaliser preset for opti-
mal classic music sound);
❒ "ROCK" (equaliser preset for optimal
rock and pop music sound);
❒ "JAZZ" (equaliser preset for optimal
jazz music sound);
When one of the equaliser presets is ac-
tive, "EQ" will appear on the display.
*USER EQ SETTINGS function
(equaliser settings only if the
USER setting has been selected)
To set a customised equaliser adjustment,
use the button or to select USER and
press down and hold the button
A graph with 7 bars will appear on the dis-
play, where each bar represents a fre-
quency. Select the bar to adjust using the
buttons ¯ or ˙; the selected bar will
start to flash and it can be adjusted using
the buttons or .
To store the setting, press the AUDIO
button again. "USER EQ SETTINGS" will
appear on the display.

ANTITHEFT PROTECTION

Refer to what is stated in the chapter "CD
MP3 PLAYER".
.