Radio (Tuner); Introduction; Selecting The Frequency Band; Preselection Buttons - Fiat 500 Manual

INTRODUCTION

When the car radio is turned on, the last
function that was selected before turning
it off (Radio, CD) is activated.
To select the Radio function when an-
other audio source is being listened to,
briefly press the FM or AM buttons de-
pending on the desired band.
Once the Radio mode has been activated,
the display will show the name (only RDS
stations) and the frequency of the select-
ed radio station, the frequency band se-
lected (ex. FM1) and the preselect but-
ton number (ex. P1).
FREQUENCY BAND SELECTION
With the Radio mode active, press the FM
or AM button briefly and repeatedly to se-
lect the desired reception band.
Press the button to toggle between the
bands:
❒ Pressing the FM button: "FM1", "FM2",
"FMA";
❒ Pressing the AM button: , "MW" and
"LW".
Each band is identified on the display.
The car radio will tune to the last station
selected in the frequency.
R R A A D D I I O O ( ( T T u u n n
R R A A D D I I O O ( ( T T u u n n
The FM band is divided into the following
sections: FM1, FM2 and FMA; the FMA re-
ception band is reserved for the stations
stored automatically with the AutoSTore
function.
PRESET BUTTONS
The buttons numbered from 1 to 6 are
used to set the following presets:
❒ 18 in the FM band (6 in FM1, 6 in FM2,
6 in FMA);
❒ 6 in the MW band;
❒ 6 in the LW band;
To listen to a preset station, select the de-
sired frequency band and then briefly press
the corresponding preset button (from 1
to 6).
By pressing the preset button for more
than 2 seconds, the tuned station will be
stored. The storing phase is confirmed by
an acoustic signal.
e e r r ) )
e e r r ) )
MEMORISING THE LAST
SELECTED STATION
The radio automatically memorises the
last station that was selected for each re-
ception band, which is then tuned when
the radio is turned on or when the re-
ception band is changed.

AUTOMATIC TUNING

Briefly press the button ¯ or ˙ to start
the automatic tuning search for the next
station that can be received in the select-
ed direction.
If the button ¯ or ˙ is pressed down
longer, the fast search starts. When the but-
ton is released, the tuning will stop on the
next station that can be received.
If the TA function is on (traffic information),
the tuner will only search for stations that
transmit traffic updates.
13