Mute/Pause Function; Audio Adjustments; Sound Adjustment; Balancing Adjustment - Fiat 500 Manual

MUTE /PAUSE FUNCTION
(sets volume to zero)
Press the MUTE button briefly to activate
the MUTE function. The volume will de-
crease progressively and "MUTE" will ap-
pear on the display in radio mode or
"PAUSE" in CD mode.
Press the MUTE button again to deacti-
vate the Mute function. The volume will
increase progressively until it reaches the
previously set level.
When the volume is changed using the
controls, the Mute function is deactivated
and the volume is adjusted to the new se-
lected level.
With the Mute function on;
❒ when traffic information arrives (if the
TA function is on) or when an emer-
gency alarm is received, the Mute func-
tion is ignored. Once the announce-
ment is concluded, the function is re-
activated.

AUDIO ADJUSTMENTS

The functions that can be selected from
the audio menu change depending on the
context: AM/FM/CD.
Press the AUDIO button briefly to change
the Audio functions. "BASS" will appear
on the display.
Use the buttons or to scroll the
menu functions. To change the setting
of the selected function, use the buttons
¯ or ˙.
The current status of the selected func-
tion will appear.
The functions managed by the Menu are:
❒ BASS (bass adjustment);
❒ TREBLE (treble adjustment);
❒ BALANCE (right/left balance adjust-
ment);
❒ FADER (front/rear balance adjustment);
❒ LOUDNESS (LOUDNESS function
on/off);
❒ EQUALIZER (activation and selection
of factory equalisation settings);
❒ USER EQUALISER (customised equal-
isation setting).
TONE ADJUSTMENT
(bass/treble)
Proceed as follows:
❒ Use the button
or
"BASS" or "TREBLE" in the AUDIO
menu;
❒ press the button
or
crease/decrease the base or treble set-
tings.
By pressing the buttons briefly, the levels
will change progressively. By pressing them
down longer, the levels will change quick-
ly.

BALANCING ADJUSTMENT

Proceed as follows:
❒ Use the button
or
"BALANCE" in the AUDIO menu;
❒ press the button ¯ to increase the
sound from the right speakers or the
button ˙ to increase the sound from
the left speakers.
By pressing the buttons briefly, the levels
will change progressively. By pressing them
down longer, the levels will change quick-
ly.
Select "¯ 0 ˙" to set the same level for
the right and left audio outputs.
to set the
to in-
to set the
11