Calibration Frequency - Olympus Magna-Mike 8600 User Manual

DMTA-10026-01EN, Rev. D, January 2015
Part number
86ACC-PR3-KIT
[Q7800005]
86ACC-W-KIT
(U8771070)
80CAL-NIS
(U8771011)
4.6

Calibration Frequency

You should perform a calibration:
• Daily or at the start of a work session
• When changing to a different target ball size
74 Chapter 4
Table 7 Calibration kits (continued)
Description
Low-profile probe
calibration kit
Wire target calibration
kit for applications
requiring a wire target
max range up to
12.70 mm (0.500 in.)
NIST calibration
Standards
Targets included
in kit
1.59 mm (1/16 in.), 86CAL-PR3-TB1,
3.18 mm (1/8 in.), 86CAL-PR3-TB2,
and 0.66 mm 86CAL-PR3-TW2,
(0.026 in.) 80TB1, 80TB2, 86TW2,
diameter target 86CAL-PR3-010,
wire 86CAL-PR3-020,
86CAL-PR3-040,
86CAL-PR3-080,
86CAL-PR3-120, and
86CAL-PR3-160 in a
plastic case.
1.14 mm 86CAL-TW1, 86TW1,
(0.045 in.) and 86TW2, 86WCAL-010,
0.66 mm 86WCAL-020,
(0.026 in.) 86WCAL-040,
diameter target 86WCAL-080,
wire 86WCAL-160,
86WCAL-240,
86WCAL-360, and
86WCAL-500 in a
plastic case.
Kit does not A complete set of six
include any balls, Magna-Mike calibration
disks, or wire standards traceable to
targets. NIST for applications
where thicknesses are
up to 6.10 mm
(0.240 in.). The
certificate of calibration
is also included.
Items included in kit