Table of Contents
Advertisement
Specifications
The maximum rating for the High Power Wall Connector is 20 kW or 80 amps at 240 volts. Your
vehicle can charge from 200 to 240 volts.
Voltage and
240V AC single-phase: L1, L2, and
Wiring
safety ground
208V AC 3-phase, Wye-connected:
Any 2 phases, and safety ground.
240V AC 3-phase, delta-connected:
With center tap on one leg, use only
the two phases on either side of the
center tap. The two phases must both
measure 120V AC to ground. Do not
use the third leg (208V "stinger").
Current
Maximum 100A circuit breaker.
The maximum current for charging
the vehicle is 80A or 20 kW.
At 240V, this is 19 kW maximum.
Frequency
60 Hz
Cable Length
Bracket
Dimensions
Weight
(including
bracket)
Operating
Temperature
Storage
Temperature
Enclosure Rating
Type 3R
Agency
UL listed under file number E351001,
Approvals
FCC Part 15
2
120V ABOVE GROUND
(common in North America)
Approximately 25' (7.6 m)
Width: 6.22" (158.2 mm)
HIGH POWER WALL CONNECTOR INSTALLATION GUIDE
230V ABOVE GROUND (common
in Europe, Asia, and Australia)
230V AC single-phase: LINE,
NEUTRAL, and EARTH.
Maximum 100A circuit breaker.
The maximum current for charging
the vehicle is 80A or 20 kW.
At 230V, this is 18 kW maximum.
50-60 Hz
Height: 15" (382 mm)
Depth: 3.7" (96 mm)
20 lbs (9 kg)
-22°F to 113°F
-30°C to 45°C
-58°F to 185°F
-50°C to 85°C
IP 44
CE
Advertisement
Table of Contents
