Step Eight - Secure Cover And Power Up - Tesla HPWC Installation Manual

Step Eight - Secure Cover and Power Up

1
Reposition the front cover over the unit,
aligning the five tabs on the back of the
front cover with their corresponding slots.
Starting at the bottom and working
upwards, press firmly on both sides of the
front cover until it clicks into place.
2
Using a T20 torx driver, re-attach the two
security screws that you removed from the
bottom of the High Power Wall Connector
in "Step Two - Install Wall Bracket" on
page 10.
3
Turn on the power.
4
Attempt to charge the car to ensure the
High Power Wall Connector is operating
correctly and charging at the selected
operating current. For instructions on how
to charge, refer to the owner information
provided with your vehicle.
16 HIGH POWER WALL CONNECTOR INSTALLATION GUIDE