Switch Settings - Mitsubishi Electric PUHY-P250YNW-A Service Handbook

[2-3 Switch Settings ]

2) Remote controller wiring
Type
Number of
Cable type cores
Cable size
Maximum overall line
length
*1 The use of cables that are smaller than 0.75mm
2-3

Switch Settings

1. Switch setting
Refer to section [2-7 Example System with an MA Remote Controller] before performing wiring work.
Set the switches while the power is turned off.
If the switch settings are changed while the unit is being powered, those changes will not take effect, and the unit will not
function properly.
BS_02_C
MA remote controller
CVV
2-core cable
2 *1
0.3 to 1.25mm
[AWG22 to 16]
200m [656ft] max.
2
[AWG18] is recommended for easy handling.
3
chapter 2 -