Mitsubishi Electric PUHY-P250YNW-A Service Handbook page 187

Hide thumbs Also See for PUHY-P250YNW-A:
Table of Contents

Advertisement

[7-8 Error Code Definitions and Solutions: Codes [6000 - 6999] ]
7-8-20
Error Code [6842]
1. Error code definition
A control communication transmission/reception hardware trouble
2. Error definition and error detection method
Indoor/outdoor unit communication error (Transmitting error)
Abnormal if "1" receiving is detected 30 times continuously though indoor controller board has transmitted "0".
3. Cause, check method and remedy
(1)
Defective transmitting receiving circuit of indoor controller board
(2)
Noise has entered into power supply.
(3)
Noise has entered into outdoor control wire.
54
- chapter 7
Cause
Check method and remedy
Turn the power off, and on again to check. If
abnormality generates again, replace indoor
controller board.
BS_07_C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Puhy-p500ysnw-aPfd-p250vm-ePfd-p500vm-e

Table of Contents