[9-1 Service Overview ]
9-1-3
Necessary Materials
The use of the USB function requires a USB memory stick and a portable battery charger.
See below for the types of USB memory stick and portable charger that can be used.
(1) USB memory stick
Use a USB memory stick that meets the following specifications.
USB 2.0 compatible
Formatted in FAT 32
Without a security function
(2) Portable battery charger
Use a portable battery charger that meets the following specifications for rewriting the software.
USB 2.0 compatible
Voltage and amperage rating of 5 V and 2.1 A (MAX)
A USB cable is required to connect the control board and the portable battery charger.
Use a cable that meets the following specifications.
[Type A male] - [Micro B male] USB cable
The control board has a micro B female connector.
BS_09_A1
3
chapter 9 -