View the Status Messages on the Phone
You can view the following information:
• Elapsed time—Total time elapsed since the last reboot of the system
• Tx (Packets)—Transmitted packets from the phone.
• Rx (Packets)—Received packets from the phone.
View the Status Messages on the Phone
Procedure
Step 1
Press Applications
Step 2
Select Status > Status messages.
You can view a log of the various phone statuses since provisioning was last done.
Note
Step 3
Press Back.
View the Line Status
Procedure
Step 1
Press Applications
Step 2
Select Status > Phone status > Line status.
You can view the status of each line on the phone.
View 802.1X Transaction Status
Procedure
Step 1
Press Applications
Step 2
Select Network configuration > Ethernet configuration > 802.1X authentication > Transaction status.
You can view the following information:
• Transaction status
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
28
.
Status messages reflect UTC time and are not affected by the timezone settings on the phone.
.
.
Your Phone