Auto Provision Your Phone With Short Activation Code; Set A Password On Initial Phone Boot Up; User Authentication Control; Sign Into Your Extension From Another Phone (Extension Mobility) - Cisco 7800 Series User Manual

Auto Provision Your Phone with Short Activation Code

Auto Provision Your Phone with Short Activation Code
After your phone boots up, you see a welcome screen where you can enter the activation code. If you don't
have the activation code, contact your administrator.
Before you begin
Your administrator provides your activation code:
Procedure
Step 1 Press pound (#), and enter your activation code in the field that is provided on the Welcome screen.
Step 2
Press Continue.
The phone completes the provisioning process automatically.
Step 3
If an error message displays, enter the code again or contact your administrator.

Set a Password on Initial Phone Boot Up

The first time your phone boots up, you may be prompted to set a password. If you are not prompted, your
administrator has created a password for you.
Procedure
Step 1
Enter your password in the New password and Reenter new password fields.
Step 2 Press Save.

User Authentication Control

Your administrator can configure if you require authentication to access phone menus. Your administrator
can also customize and turn off the authentication to allow access to all phone menus.
With this feature, whether any phone menu needs authentication is controlled by your administrator. If your
administrator configures authentication to access the menu, you need to provide the password and sign in to
access the menu.
Sign into Your Extension from Another Phone (Extension
Mobility)
If extension mobility is configured, you can sign into a different phone in your network and have it act the
same as your phone. After you sign in, the phone adopts your personal directory number.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
12
Your Phone