General Information; Tools Required - Precor C556 Service Manual

• Visually check the EFX before beginning service or maintenance operations. If it is not
completely assembled or is damaged in any way, exercise extreme caution while operating
and checking the EFX.
• When operating the EFX, do not wear loose clothing. Do not wear shoes with heels or
leather soles. Check the soles of your shoes and remove any embedded stones. Tie long
hair back.
• Do not rock the unit. Do not stand or climb on the handlebars, display enclosure, or cover.
• Do not set anything on the handlebars, display enclosure, or cover. Never place liquids on
any part of the EFX, while performing service.
• To prevent electrical shock, keep all electrical components, such as the power cord and
circuit breaker away from water and other liquids.
• Do not use accessory attachments that are not recommended by the manufacturer-such
attachments might cause injuries.

General Information

For the latest exploded view, part number and part pricing information, visit the Precor dealer
website at "www.precor.com/Dealer".

Tools Required

Multimeter
Anti-static kit
4" - 6" gear puller
"C" clamp or Carpenter's clamp
US and metric end wrench set
US and metric socket wrench set
Torque wrench, 200 in./lbs.
Torque wrench, 200 ft./lbs
C556 Elliptical Fitness Crosstrainer
Allen wrench set
Screwdriver set
1/2" allen key, socket wrench mounted
Precor part number 20030-117 belt gauge
Straight edge
Page 4