Divine Outdoor Gas Fireplace
Section:
Step 5). Insert three self drilling screws on the left side
using the predrilled holes in the mounting brackets as a
guide. Repeat for the right side. It is possible to predrill
the holes using a 1/8" drill bit if preferred.
Figure 7.
Figure 8.
Step 6). Hang the Screen Assembly on the top of the
brackets.
Figure 9.
Page 16
Installation
Step 7). Secure the bottom of the screen using two stain-
less steel machine screws provided.
Figure 10.
Figure 11.
Step 8). Reverse steps 6 and 7 to remove screen.
XG0150 - 140707.2