Preparation For Installation Of The Stacker - Ricoh EMP 156 Installation Manual

3.2 Preparation for Installation of the Stacker

(1) Unscrew the five screws to remove the Rear Cover.
(2) Unscrew the four screws to remove the Side Cover (RH).
(3) Open the Front Cover (SL) and Front Cover (ADP).
(4) Unscrew the four screws to remove the Front Cover (SR) Assembly.
(5) Unscrew the two screws to open the PK Box Assembly.
(6) Unscrew the four screws to remove the Top Cover.
Side Cover (RH)
Rear Cover
Screw (5pcs)
Screw (4pcs)
Front Cover (SR) Assembly
PK Box Assembly
Screw
Screw
Front Cover (SL)
Screw
Screw
Front Cover (ADP)
Top Cover
II L 00
Preparation for installation 3-3