ECS P965T-A Manual page 43

USB Controller (Enabled)
Enables or disables the onboard USB controller. We recommend users keep the dafault value.
Disabling it might cause the USB devices not to work properly.
USB 2.0 Controller (Enabled)
This item enables or disables the onboard USB 2.0 controller.
USB Keyboard Support (Enabled)
Enable this item if you plan to use a keyboard connected through the USB port in a legacy
operating system (such as DOS) that does not support Plug and Play.
USB Mouse Support (Enabled)
Enable this item if you plan to use a mouse connected through the USB port in a legacy
operating system (such as DOS) that does not support Plug and Play.
RTL GLAN Device (Enabled)
Use this item to enable or disable the Realtek GLAN device.
Azalia codec (Enabled)
This item allows you to control the onboard Azalia audio function.
SATA2 Controller (IDE Mode)
Enables and disables the onboard SATA2 device.
Press <Esc> to return to the Integrated Peripherals page.
SuperIO Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Onboard FDC Controller
Onboard Serial Port 1
UART Port
UART Mode Select
UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
Phoenix-AwardBIOS CMOS Setup Utility
SuperIO Device
[Enabled]
[3F8/IRQ4]
[Disabled]
[IrDA]
[Half]
[378/IRQ7]
[ECP]
[3]
F6:Fail-Safe Defaults F7:Optimized Defaults
Using BIOS
Item Help
Menu Level
37