ECS P965T-A Manual page 29

SATA1/3/5/6/7: Serial ATA connectors
These connectors are use to support the new Serial ATA devices for the highest date transfer
rates (3.0 Gb/s), simpler disk drive cabling and easier PC assembly. It eliminates limitations
of the current Parallel ATA interface. But maintains register compatibility and software
compatibility with Parallel ATA.
Pin Signal Name
Pin Signal Name
1
Ground
3
TX-
5
RX-
7
Ground
SPDIOF1: SPDIF out header
This is an optional header that provides an S/PDIF (Sony/Philips Digital Interface) output
to digital multimedia device through optical fiber or coxial connector.
Pin Signal Name
Pin Signal Name
1 SPDIF
2 +5VA
3 Key
4 GND
Installing the Motherboard
Pin Signal Name
Function
2
TX+
4
Ground
6
RX+
-
-
Function
Function
SPDIF digital output
5V analog power
No pin
Ground
23