ECS P965T-A Manual page 39

Network Boot Priority (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
1. Network 0 :
2. Network 1:
3. Network 2:
4. Network 3:
: Move
F5:Previous Values
Press <Esc> to return to the Advanced BIOS Features page.
CPU L1&L2 Cache (Enabled)
All processors that can be installed in this mainboard use internal level 1 (L1) and external
level 2 (L2) cache memory to improve performance. Leave this item at the default value
for better performance.
CPU L3 Cache (Enabled)
This item is only available when processors support L3. Some high-end processors support
L3. If the CPU do support L3, you may set this item to enable or disable. Leave this item
at the default value for better performance.
Hyper-Threading Technology (Enabled)
This item is only available when the chipset supports Hyper-Threading and you are using a
Hyper-Threading CPU.
Quick Power On Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start up
faster. You might like to enable this item after you are confident that your system hardware
is operating smoothly.
First/Second/Third Boot Device (Removable/Hard Disk/CDROM)
Use these three items to select the priority and order of the devices that your system
searches for an operating system at start-up time.
item is for SATA1 or SATA3/5/6 port (Provide by ICH8, black SATA connector) used
if you install SATA CD-ROM in one of SATA1/3/5/6 port. If you installed SATA CD-
ROM in SATA7 or PATA CD-ROM in IDEJ1 port that provide from J-Micron JMB361
(Red SATA connector is SATA7), please choose "CD-ROM name" from first boot
device list in Advance BIOS Features -> First boot device
Phoenix-AwardBIOS CMOS Setup Utility
Network Boot Priority
Menu Level
Use <
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
PU/PD/+/-:Change Priority F10:Save
F6:Fail-Safe Defaults F7:Optimized Defaults
The First boot device "CD-ROM"
Using BIOS
Item Help
> or < > to
ESC:Exit
33