Table of Contents
Advertisement
Safety information
2.7 Electrostatic sensitive devices
2.5
Dangerous voltage when the rotor rotates
Dangerous voltage when the rotor rotates
There are dangerous voltages at the terminals while the machine rotor rotates and immediately
afterwards.
You must observe the following safety instructions to prevent death, injury or material damage:
• Do not touch the terminals while the rotor is rotating and immediately afterwards.
• To discharge the winding, after the rotor comes to a standstill, connect the winding to
2.6
Electromagnetic fields when operating electrical power
engineering installations
Electrical power equipment generate electromagnetic fields during operation. Potentially lethal
malfunctions can occur in medical implants, e.g. pacemakers, in the vicinity of electrical power
equipment. Data may be lost on magnetic or electronic data carriers.
• Protect the personnel working in the plant by taking appropriate measures, such as erecting
identifying markings, safety barriers and warning signs and giving safety talks.
• Observe the nationally applicable health and safety regulations.
• It is forbidden for people with pacemakers to be close to the machine.
• Do not carry any magnetic or electronic data media.
2.7
Electrostatic sensitive devices
Material damage due to electrostatic discharge
Electronic modules contain components that can be destroyed by electrostatic discharge. These
components can be damaged or destroyed if they are not handled correctly. To protect
equipment against damage, follow the instructions given below.
• Only touch electronic modules if you absolutely have to work on them.
• The body of the person concerned must have been electrostatically discharged and
grounded immediately before any electronic modules are touched.
14
WARNING
ground potential.
Operating Instructions, 07/2020, A5E46712792A
1FU9
Advertisement
Table of Contents
