Table of Contents
Advertisement
Installing towing eyelet
Take out the towing eyelet. (P. 360)
1
Remove the eyelet cover using
2
a flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body as shown in the
illustration.
Insert the towing eyelet into the
3
hole and tighten partially by
hand.
Tighten down the towing eyelet
4
securely using a wheel nut
*
wrench
or hard metal bar.
*
: Wheel nut wrench can be pur-
chased at your Scion dealer.
Towing with a sling-type truck
Do not tow with a sling-type truck
to prevent body damage.
8-2. Steps to take in an emergency
331
8
Advertisement
Table of Contents
