Table of Contents
Advertisement
148
4-5. Opening, closing the windows
■
When the power window does not close normally
If the jam protection function is operating abnormally and a window cannot be
closed, perform the following operations using the power window switch on
the relevant door.
●
After stopping the vehicle, the window can be closed by holding the power
window switch in the one-touch closing position while the power switch is
turned to ON mode.
●
If the window still cannot be closed even by carrying out the operation as
explained above, initialize the function by performing the following proce-
dure.
Hold the power window switch in the one-touch closing position. Continue
1
holding the switch for a further 6 seconds after the window has closed.
Hold the power window switch in the one-touch opening position. Con-
2
tinue holding the switch for a further 2 seconds after the window has
opened completely.
Hold the power window switch in the one-touch closing position once
3
again. Continue holding the switch for a further 2 seconds after the win-
dow has closed.
If you release the switch while the window is moving, start again from the
beginning.
If the window continues to close but then re-open slightly even after perform-
ing the above procedure correctly, have the vehicle inspected by your Scion
dealer.
CAUTION
Observe the following precautions.
Failure to do so may result in death or serious injury.
■
Closing the windows
●
Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
●
Do not allow children to operate the power windows.
Closing a power window on someone can cause serious injury, and in
some instances, even death.
■
Jam protection function
●
Never use any part of your body to intentionally activate the jam protection
function.
●
The jam protection function may not work if something gets caught just
before the window fully closes.
Advertisement
Table of Contents
