Toyota Scion iQ EV Owner's Manual page 54

54
1-1. For safe use
■
When installing the child restraint system on the rear seat
Adjust the front seat position so that the seat rails are completely covered by
the covers bearing a triangle mark.
Cover
1
Triangle mark
2
Seat rail
3
Slide the front seat forward until the seat
rail is no longer visible, when the cover tri-
angle section is viewed from above.
■
When installing the child restraint system on the front passenger seat
When you have to use a child restraint
system on the front passenger seat,
adjust the following:
●
The seatback to the most upright posi-
tion
●
The seat cushion to the fully rearward
position
■
Selecting an appropriate child restraint system
●
Use a child restraint system appropriate for the child until the child becomes
large enough to properly wear the vehicle's seat belts.
●
If the child is too large for a child restraint system, sit the child on a rear seat
and use the vehicle's seat belt. (P. 26)