Setting The Presentation Timer - ViewSonic PJD7383 User Manual

Setting the presentation timer

Presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1. Press Timer on the remote control to access the Presentation
Timer menu, or go to the SYSTEM SETUP: Advanced >
Presentation Timer menu and press MODE/ENTER on the
projector or ENTER on the remote control to display the
Presentation Timer page.
2. Highlight Timer Period and decide the time period by pressing
/
minute increments and 5 to 240 minutes in 5-minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press
the screen by press
Selection
Always
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never
4. Press
Top-Left
5. Press
direction by pressing
Selection
Count Up
Count Down
6. Press
reminder by pressing
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press
MODE/ENTER on the projector or ENTER on the remote control.
8. A confirmation message displays. Highlight Yes and press MODE/ENTER on the
projector or ENTER on the remote control to confirm. You will see the message
"Timer is On" displaying on the screen. The timer starts counting when the timer is
on.
38 Operation
. The length of time can be set from 1 to 5 minutes in 1-
to highlight Timer Display and choose if you want the timer to show up on
/
ing
Description
Displays the timer on screen throughout the presentation
time.
Hides the timer throughout the presentation time.
to highlight Timer Position and set the timer position by pressing
Bottom-Left
to highlight Timer Counting Direction and select your desired counting
/
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
to highlight Sound Reminder and decide if you want to activate sound
/
.
Top-Right Bottom-Right
.
. If you select On, a double beep sound will be heard at
and press / to highlight On and press
/
.