Reset All - ViewSonic PJD7383 User Manual

Function
Lamp
Settings
Presentation
Timer
Security
Settings

Reset All

Settings
Current
System
Status
Lamp Mode
See "Setting Lamp Mode as Economic" on page 69
Reset Lamp Timer
See "Resetting the lamp timer" on page 73
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 69
how the total lamp hour is calculated.
See "Setting the presentation timer" on page 38
See "Utilizing the password function" on page 24
Returns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User
1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings.
Source
Shows the current signal source.
Color Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
MAC Address
Shows the MAC Address of your projector.
MAC Address stands for Media Access Control Address,
which is a physical layer address used to uniquely identify
a network node.
Description
for details.
for details.
for details on
for details.
for details,
Operation 67