Using The Quick Menu; Charging The Battery - ViewSonic PJD7383 User Manual

If there are multiple projectors, you can set a channel with the Link Channel menu to
differentiate between projectors and communicate with the pen.
To meet the needs of left-handers and right-handers, you can set your handwriting mode on
the Handwriting Mode menu. When selecting User for the mode, you need to further
adjust the pointer's Horizontal and Vertical positions.
You can change the function of the Middle button with the M Button menu. If you want to
annotate during Microsoft PowerPoint slide shows, do the following:
1. Set PwrPnt Annotate
2. Click the middle button to show a red dot.
3. Click the left mouse button or click the pen's tip against the projection surface to draw
or write.
4. To turn off the annotation function, click the middle button. The red dot changes back
to a normal pointer.
To use the Interactive software, you need to install the provided Interactive software
(included on a disc) to your computer, select Interactive Software on the M Button menu,
and then click the middle button to activate it.
• If the pen is far away from the screen, be sure to press the left mouse button to click and
drag.
• When the PointBlank pen is activated, the 3D Sync and Color Mode menus are not
available.
• Avoid standing too far from the screen. The closer you are to the screen, the better
performance the pen has.
• Avoid shadows! The pen cannot work if its tip is in a shadow or it is pointing at a shadow.

Using the quick menu

1. Simply click the middle button to activate the quick menu.
2. Rotate the middle button to select a desired function.
3. To perform the selected function, click the middle button again.

Charging the battery

1. To charge the battery, open the flap on the back of the pen to expose the USB
connector.
54 Operation