ViewSonic PJD7383 User Manual page 69

Function
Language
Projector
Position
Auto Power
Off
Blank Timer
Panel Key
Lock
Splash
Screen
Screen
Capture
Message
LAN Control
Settings
Standby
Settings
High Altitude
Mode
DCR
Sets the language for the On-Screen Display (OSD) menus. See
"Using the menus" on page 23
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See
for details.
Allows the projector to turn off automatically if no input signal
is detected after a set period of time. See
Off" on page 69 for details.
Sets the image blank time when the Blank feature is activated,
once elapsed the image will return to the screen. See
image" on page 35 for details.
Disables or enables all panel key functions except
on the projector and keys on the remote control. See
control keys" on page 35
Allows you to select which logo screen will be displayed during
projector start-up.
Captures and stores the projected picture as Screen Capture.
See "Creating your own startup screen" on page 37
Selecting On displays the current information on the screen
when the projector is detecting or searching for a signal.
See "Controlling the projector through a LAN environment" on
page 39 for details.
See "Using the projector in standby mode" on page 57
details.
A mode for operation in high altitude areas. See
high altitude environment" on page 36
Enables or disables the DCR (Dynamic Contrast Ratio) function.
Selecting On enables the function and the projector will
automatically switch the lamp mode between normal and
economic modes according to the input image detected.
This function is only available when a PC source is in use.
After enabling DCR, frequent lamp mode switching may
shorten lamp life and noise level will vary during operation.
Description
for details.
"Choosing a location" on page 12
"Setting Auto Power
for details.
for details.
"Hiding the
I
I
POWER
"Locking
for details.
for
"Operating in a
Operation 65