ViewSonic N2750w User Manual page 25

(It does not function in any other mode except in TV mode)
Source Input: TV
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 TV MENU
Page 6 SOUND MENU
Page 7 PARENTAL CONTRAL
MTS: The function is to provide the multi-channel TV sound. The system with
MTS can receive Dual, Stereo, SAP(Secondary Audio Program), or Mono sound.
E
Both Stereo and Mono sound receive from TV broadcasts in main sound.
N
However, the SAP feature permits the TV station to broadcast other information,
G
so that it can be audio in another language. With Dual sound, you can enjoy the
L
main sound (normal program soundtrack) and the second language at the same
I
time.
S
H TV/CATV SELECT:
AUTO SCAN:
1. Function: To look for all the channels viewable in the set area. Kindly suggest
you auto scan all the channels before watching your TV for the first time.
2. After auto scan all the channels, you need not to do it again when turning on
your TV next time.
SET CHANNEL:
CHANNEL:
How to do?
1. Use the function "SET CHANNEL" to select the desired channel.
2. Move your cursor bar to CHENNEL by using
3. Press
4. Press EXIT to exit the menu.
Ps. After input the instruction of Add/Del Channel, as running the channels by using
your remote control, the channel you deleted will be passed over, and the channel you added
will be shown up.
LABEL: To set a name for the channel with 0~9 and A~Z.
ViewSonic
To select TV signal input from TV or CATV.
To auto scan the TV channels (TV or CATV).
To select your desired channels by
To add or delete the appointed TV channel.
or one time to add or delete the appointed channel.
N2750w 24
.
.
with