TV Menu ......................19 Setup Menu ..................... 19 DTV Menu ....................... 21 VGA Menu ....................... 24 V-Chip Menu ....................24 PIP/POP ......................27 Other Information Specifications ....................29 Troubleshooting ....................30 Customer Support ................... 31 Limited Warranty ..................... 32 ViewSonic N2751w...
To assure continued FCC compliance, the user must use grounded power supply cord and the cables which are included with the equipment or specified. Also, any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. ViewSonic N2751w...
Purchase Date: Product disposal at end of product life ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. Your local waste disposal company may provide information about proper disposal.
LCD TV screen or ® case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
Getting Started Congratulations on your purchase of a ViewSonic LCD TV. ® Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD TV package includes: • LCD TV • 44-Key Remote Control with batteries •...
1. Press VOL+ and MENU buttons at the same time to lock power button, and press VOL+ and MENU buttons again to unlock it. 2. Press VOL- and VOL+ buttons at the same time to lock OSD menu, and press VOL- and VOL+ buttons again to unlock it. ViewSonic N2751w...
Connect this port to the HDMI output of A/V device. SPDIF Optical output Connect this port to the SPDIF input of A/V device. Headphone Jack Connect this port to your headphone. Power (AC input) Using power cord provided, connect to a power source. ViewSonic N2751w...
Page 11
Toggle to enable/disable Picture in Picture/Picture Out of Picture function 26 P.INPUT POP/PIP input source select 27 V-CHIP Set V-Chip rating 28 SWAP Switch between main screen and sub-screen Note: PIP means Picture In Picture. POP means Picture Out Of Picture. ViewSonic N2751w...
1) TV: Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV channels into memory with AUTO SCAN function when using an antenna or cable TV system without a cable connecter box (See page 19). RF Cable or Adapter (not supplied) ViewSonic N2751w...
Page 13
Connect Video/ Audio cables from compatible devices into the back panel of LCD TV. 1) With AV cable: RCA A/V Cable VCR or DVD Player 2) With S-Video cable: S-Video Cable (not supplied) Audio in Cable (not supplied) VCR or DVD Player ViewSonic N2751w...
4. Connecting to External Stereo System to Listen to LCD TV Sound Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo system sold separately). Audio in Cable (not supplied) Stereo system ViewSonic N2751w...
Connect the VGA cable from VGA output of computer to the VGA terminal input of your LCD TV. VGA 15 Pin Cable 7. PC Audio In Connect the Audio cable (green) from audio output of your computer to the audio input terminal (green) of the LCD TV. PC Audio Connection (not supplied) ViewSonic N2751w...
Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have been completed, and plug the other end of the power cord into a correctly grounded electrical outlet. AC wall socket ViewSonic N2751w...
Modes, and Smart Picture Modes, depending on what input source it is in.) Main Window Input (Program title.) Channel TVBS Resolution NTSC Stereo RF2-1 1080i H D Audio Type MONO Smart Sound Mode: User (Program details.) Smart Picture Mode: User ViewSonic N2751w...
Page 18
Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice – OFF, 30min, 60min, 90min, or 120min. ViewSonic N2751w...
Page 19
• Use ▲▼ to select the control you want to adjust. • When selecting the control with Press <Enter>, press ENTER to enable the function. • Press ◄► to adjust the settings. • Press MENU to exit from the OSD menu. ViewSonic N2751w...
• Audio Out: To control sound output ON/OFF from the RCA audio out connectors. Note: To adjust the Audio settings, Smart Sound must be set to the User mode. (Select through the Sound button on the remote control) ViewSonic N2751w...
Cancel or exit without pressing OK. Setup Menu — To set up OSD window Setup Menu is active in all input sources. • Language: To select a OSD language from English, French or Spanish. • Parental: To set up parental control. ViewSonic N2751w...
Page 22
Aspect Ratio: To select image size between Normal, Full, Wide1, Wide2, Wide3, 4:3, 16:9, and No scale. • OSD Timeout: To setup the display time of OSD. (5, 15, 45, and 60 seconds) • Memory Recall: To restore the factory default settings. ViewSonic N2751w...
SPDIF Type: To select the type of audio transfer file format. • Auto Scan: Press ENTER to start scanning DTV channels automatically. Press MENU at any time to cancel Auto Scan. • Manual Scan: To scan the DTV channels manually. Press ENTER and select Scan Mode with ◄►. ViewSonic N2751w...
Page 24
Press ENTER to start scanning, and press MENU at anytime to cancel scanning. • Channel Skip: To skip channels when viewing channels with CH ▲ and ▼. Press ENTER, and then use ENTER to check/uncheck the channel you want to skip. ViewSonic N2751w...
Page 25
Font Color: To select a font color from Black, White, Green, Blue, Red, Cyan, Yellow, or Magenta. Font Opacity: To select font opacity from Solid, Translucent, or Transparent. Background Color: To select background color. Background Opacity: To select background opacity. Window Color: To select window color. Window Opacity: To select window opacity. ViewSonic N2751w...
However, setting V-Chip can block the appointed channels. To set up V-CHIP function: Press V-CHIP button → enter the password → press ENTER, and the following screen will be displayed. Use ▲▼ to select your desired optional item, and press ENTER. ViewSonic N2751w...
Page 27
7 and above that is unsuitable for children under 14 years of age TV-G General audience TV-MA Mature audience only Use ENTER button to block or unblock the ratings, and use MENU to exit. ViewSonic N2751w...
Page 28
CF_18ANS This emission is reserved to the the young children adults Use ENTER button to block or unblock the ratings, and use MENU to exit. • Block MPAA Unrated: To block unrated movies. • Block TV None Rating: To block unrated TV programs. ViewSonic N2751w...
2. Use ◄► to select the sub-input source and press ENTER to confirm. Note: To select the input source for main screen, press INPUT button. • SWAP: Press SWAP to exchange main screen to sub-screen, including video and sound. The function is available both in PIP and POP. ViewSonic N2751w...
Page 30
PIP Position Select: Press P.POS to select the position of sub-screen. The function only acts on PIP. Note that the screen indexed with the pink frame is the screen you select to set up. Use ◄► to move the index between the main screen and the sub-screen. ViewSonic N2751w...
Preset Timing Mode (Pre-adjusted to GTF® 1360 x 768 @ 60 Hz) Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD TV. Note: Product Specifications are subject to change without notice. ViewSonic N2751w...
• CATV is connected improperly or not connected; please check all the CATV connections. • The cable TV service is interrupted; please contact your cable operator. Picture is cut off/with sidebar screen • Is the image positioned correctly? • Are screen mode adjustments such as picture size set correctly? ViewSonic N2751w...
For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/ T=Telephone Web Site Email Region F=Fax T= (800) 688 6688 United States www.viewsonic.com/support/ service.us@viewsonic.com F= (909) 468 1202 Canada www.viewsonic.com/support/ T= (866) 463 4775 service.ca@viewsonic.com ViewSonic N2751w...
How long the warranty is effective: ViewSonic LCD TVs are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase.