Installation - ViewSonic N2750w User Manual

Installation

1. Insert Remote Control Batteries
1 Remove the battery cover by pulling then lifting the knob on the cover.
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3 Reattach the battery cover.
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries incor-
rectly may result in cracking or leakage, which may pose a risk of fire or lead to
personal injury.
Dispose of the battery in accordance with local laws and regulations.
E
Keep the battery away from children and pets.
N
When the remote control will not to be used for an extended period, remove
G
the batteries.
L
I
S
2. Connecting with the antenna
H
Make sure the power is off before installing N2750w.
Connect the LCD TV to TV antenna terminal or CATV box by 75-ohm coaxial cable.
RF Cable or Adapter
ViewSonic
CAUTION
N2750W 10