Safety Regulations; General Information; Packing Contents - Triax CCS 483 Assembly Instruction Manual

Head-end digital modulator
Table of Contents

Advertisement

1

Safety regulations

Important
• Assembly, installation and servicing must be carried out by an authorised
electrician.
• Switch off operating voltage before the start of assembly or service work or
pull out the mains plug.
• Install the system ...
- in a dust-free, dry environment
- so that it is protected from moisture, vapours, splashing water and damp
- somewhere protected from direct sunlight
- away from the immediate vicinity of heat sources
- at an ambient temperature of < 50 °C.
• Make sure the device is adequately ventilated.
Do not cover the ventilation slots.
• Beware of short circuits!
• No liability is accepted for damage caused by faulty connection or inexpert
handling.
• Observe the relevant norms, regulations and guidelines on the installation and op-
eration of antenna systems.
• Earth the SAT receiver using the equipotential bonding rail in accordance with
DIN EN 50083 and VDE 0855.
• Do not perform installation and service work during thunderstorms.
Take action to prevent static discharge when working on the device.
2

General information

2.1 Packing contents

1 Cassette CCS 483 or CCS 484 or CCS 485
2 HF connection cables
1 CD (Assembly instructions)
- 3 -
- 3 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ccs 484Ccs 485325148325149325150

Table of Contents