Deleting A Pid; Renaming A Pid - Triax CCS 483 Assembly Instruction Manual

Deleting a PID

In this menu a PID of the data flow can be deleted.
/
• Use the
◀ ▶
spective letter (hexadecimal number) of the PID to be deleted
("0xFFFF") and set the hexadecimal number using
• Use to set the cursor to "off" and switch to "on" (delete)
▶
using the
• Press the
—> The menu "Renaming the PID" – "REMAP"
is activated.

Renaming a PID

In this menu you can allocate a new address to a PID retain-
ing the complete data content.
/
• Use the
◀ ▶
tive letter (hexadecimal number) of the PID to be changed
("0xFFFF") and set the hexadecimal number using
/
• Use the
◀ ▶
tive letter of the new PID to be set ("–> FFFF") and set the
hexadecimal number using
• Use to set the cursor to "off" and switch to "on" ( renaming)
▶
using the
• Press the
—> The menu "Conditional Access Table" – "CAT"
is activated.
- 21 - - 21 -
Bx 1A DROP:
PID 0xFFFF
buttons to place the cursor under the re-
buttons.
button.
Bx 1A REMAP:
0xFFFF–>FFFF
buttons to place the cursor under the respec-
buttons to place the cursor under the respec-
.
buttons.
button.
/
◀ ▶
/
–
+
off
.
/
◀
▶
/
–
off +
.