Network Information Table (Nit) - Triax CCS 483 Assembly Instruction Manual

• Press the
—> The menu "Network Information Table" – "NIT"

Network Information Table (NIT)

Bx 1A NIT:
off => Make
• To switch NIT "on" or "off": Press the
• Activate "Make" by pressing
—> The NIT of all Cassettes are switched on.
—> The Cassette gets all the information it needs (output
—> Then the NIT is generated, added and sent to all
• To deactivate the new NIT: Press the
—> The SAT-NIT is restored.
Notes:
– The cable NITs of the other Cassettes remain acti-
– All QAM Cassettes must be equipped with a TP
button.
is activated.
on / off
/
–
+
▶
M
frequencies, output symbol rates etc.) to generate the
cable NIT from all the QAM Cassettes. This process
may take a few seconds.
The display shows: "Making ...".
QAM Cassettes. The other QAM Cassettes also add
this new cable NIT. The status of all QAM Cassettes
in the NIT menu changes to "on".
vated. When it is reactivated ("on"), the previously
generated NIT is added again. If you have changed
parameters in the meantime, you must select "Make"
to generate a new, up-to-date NIT.
module, be set and ready for reception. Cassettes
without TP modules are not taken into consideration
during the NIT setting. If the NIT is activated ("on")
and parameters are modified and saved, a warning
appears in the display: "Rebuilt NIT !!!".
- 29 - - 29 -
button.
/
.
▶
button.