Setting The Input Symbol Rate; Setting The Input Frequency - Triax CCS 483 Assembly Instruction Manual

Bx 1A
27500
Bx 1A
/
◀ ▶
/
–
+ f=11836

Setting the input symbol rate

The symbol rate of the satellite transponder can be found in
the current transponder tables of the various satellite trade
magazines or in the websites of the according program pro-
viders.
INPUT:
/
◀ ▶
/
–
DVB-S
+
/
• Use the
◀ ▶
number to be changed and set the symbol rate with the
buttons .
Note: The logo "DVB-S" is without function.
• Press the
—> The menu "Setting the input frequency" – "INPUT" is
activated.

Setting the input frequency

Notes:
– If three dots " ... " appear in the second line of the display,
the Cassette is in the "station search" mode.
Please wait until the process has finished.
Once the HF receiver has synchronised to the input signal,
any offset to the target frequency is displayed in MHz,
e.g. "– 0.4".
– If a question mark "?" appears in the second line of the
display, there is no input signal present. Check the configu-
ration of the antenna system and head-end station as well
as the preceding settings of the Cassette.
INPUT:
-0.4
- 24 - - 24 -
buttons to place the cursor under the
button.
Bx 1A
(+ 9.6)OK
14.6 dB
C/N