Conditional Access Table - Triax CCS 483 Assembly Instruction Manual

Conditional Access Table

In this menu, you can change the Operator ID, for example
of the visAvision transponder (Eutelsat 8° West).
CAT is not to be changed.
• Press the
—> The menu "Setting the LNB oscillator frequency" –
"LNB-Freq.:" is activated (page 23).
CAT is to be changed.
• Press the button.
—> The CAT is scanned and the changeable values
(operator ID) are displayed.
Note:
If you try to change the CAT of a transponder which
cannot be modified, "CAT not modified" appears in the
display for a short time. Afterwards the program returns
to the "CAT original" menu.
Example:
The network operator requests that you set the operator ID
of the visAvision transponder to "2":
• Use to change the values from "DE 00" to
"DE 02".
• Press to activate "Make" to modify the operator ID.
▶
—> The menu display switches to "modified".
- 22 - - 22 -
CAT:
Bx 1A
original
+
CAT:
Bx 1A
ID DE00 => Make
▶
CAT:
Bx 1A
modified
button.
/
◀ ▶
/
–
+
/
–
+